Spent Fuel / Cask Handling Cranes

spent_fuel1.jpg

Spent Fuel / Cask Handling Overhead Cranes

In plants where reactor servicing and spent fuel handling are in the same runway area (usually within the same building), the handling of spent fuel may be accomplished with an auxiliary hoist on the reactor servicing crane. The spent fuel cask can be handled with the main hoist of that same reactor servicing crane.

Where reactor servicing and spent fuel handling are in entirely separate areas or in separate buildings, a separate crane is used for spent fuel handling. The auxiliary hoist may be mounted on and travel with the main trolley, or the auxiliary may be a commercial overhead hoist unit as described in ANSI/ASME Standard B30.16 which is independently driven on a monorail track suspended under one (or both) of the crane girders.

For this service, the main hoist is commonly rated between 100 to 150 tons while the auxiliary hoist is generally between two (2) to seven (7) tons.

The spent fuel cask handling crane may also be a critical-load handling (Type 1) piece of equipment. This type of crane must meet NRC regulations.

Whiting stands ready to assist in the design of cranes for your plant design or re-design. For specific answers to application questions, please contact the Whiting Nuclear Power Solutions Team or call 800-861-5744.

See more:

Heavy Duty Cranes
Customized cranes for CMAA crane classses D,E & F.

Medium/Heavy Duty Cranes
Pre-engineered or Customized crane designs for CMAA classes C, D & E.

Light Duty Cranes
Reliable, efficient and affordable light duty cranes.

 

 

 



Copyright Whiting Corporation 2014